- This topic has 1 reply, 2 voices, and was last updated 19 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
hey folks..can anyone tell me what hardware/software i need to rip some of my vinyl to mp3. i’m pretty tech slow, i’m not sure how to connect my stereo receiver to my PC…….
You need a cable that goes from your soundcard (1/4 inch jack) into two male ends of the red/white audio jacks. Then you need an adaptor that is 2 female red/white audio jacks on either side (4 all together). Once you have that you should wire it like this:
Turntable (red/white audio plugs) –> adaptor –> red/white audioplugs with 1/4 inch jack –> Soundcard
Once this is setup you can download a program that will record the incoming signal from your computer’s soundcard. I use a program called GrooveMechanic.
I know it’s alot to digest, if you need anything clarified ask.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.